The auto dj comes with 5 playlists, 3 of them by default like “General Rotation”. We recommend that you disable 2 of the 3 “General Rotation”, leaving just one enabled. The autodj needs at least 1 playlist as “General Rotation” with at least 1 file in it to start. If you have more than 1 […]

When trying to connect to your server, you receive a 10061 error and the server won’t start. This is almost always caused by the information being incorrect. Either the Server IP address, the Server Port # or the password is wrong. If you are connecting with Spacial Audio SAM 2/3/4 and are entering http://11.11.11.23 for […]

This usually happens if you are dropping the source to the server. Or if it drops on its own (which can happen). If the server receives no signal for a period of time, it will turn itself off. Two ways to fix this: Don’t drop the source Go to your Centova Panel > Configure Server […]

When you click on Update Media Library and it starts to load and stops (for longer than 10 mins). This could be 1 of a dozen different issues. Please make sure that you are not uploading any other file types other than .mp3 extension. (This includes, but not limited to: m4a, wma, wmv, mp4, cda, […]

FLASH players look nice, but cause all sorts of problems under certain circumstances. A FLASH player will either buffer, not play, or skip songs if you are either using: INTRO files to introduce your station AAC or AAC+ encoding The best answer is don’t use them if you don’t need either of those two above […]

When you sign up for a Shoutcast server, you are given an IP address and IP port number to use. You are also given the maximum speed that allowed on your server. For example, we have servers with the following broadcast speeds: 32kbs 48kbs 64kbps 96kbps 128kbps So if you lease a server with a […]

There are a few different reasons this could happen. Stream ripper (a “human” or “bot” that sits on your stream and records your music) A stuck connection (Someone that may had some buffering issues on their end and are trying to reconnect multiple times) Resolution: Kick the extra IP address to clear up some slots. […]

There are several tools that are useful try to figure out why you can not connect to your stream, or why it is re-buffering. 1. Perform a ping to the host .. EXAMPLE: Go to a command prompt > START > RUN > CMD Issue the following command: ping us2.amfmph.com (or the address of your […]

If you are relaying another stream, you must keep a few things in mind. At AMFMPH we run a firewall on our server to protect you (and us) from attacks from hackers / spammers. Certain ports are BLOCKED and the firewall will allow no traffic to pass through. If you are relaying another IP address […]